Teaching The Rm-Vlz620T New Functions (Learning Function) - Sony RM-VLZ620T Mode D'emploi

Teaching the RM-VLZ620T New
Functions (Learning Function)
If you cannot control a device, even after correctly
setting the manufacturer's code, you can teach the
RM-VLZ620T new functions by using the original
remote control supplied with the device.
You can teach a function to all the buttons (except
SET) for any device mode.
To teach the Device Select or SYSTEM CONTROL
buttons, see page 21.
You may find it useful to write down the functions
you have taught.
Notes
 Use new batteries in both remote control units.
 Certain remote control signals may not be learned.
 If the function has already been learned, it will be overwritten
with the new one.
 You cannot teach a number button to which you have already
assigned a channel (page 23).
 You can also teach the signals of a computer's remote control
(including a built-in tuner type) to control the monitor.
 If you do not perform learning steps for 10 seconds at any
point during the process, the learning procedure is cancelled.
18
GB
SET/SET
indicator
Device
Select
buttons
, 8
Example: To teach a function to the 
(play) button in DVD mode
1
Place the RM-VLZ620T head to head with
your device's remote control.
Remote control for
your device
About 3 – 8 cm
away
2
Press and hold SET for more than 3
seconds.
While keeping SET held down, press ,
then release both buttons.
The SET indicator
lights up.
3
Enter  - 8 - 8.
The SET indicator flashes three times to indicate
that the setting mode has been entered.
3 flashes
4
Press the Device Select button for the
device you want to control.
The selected Device Select button lights up.
RM-VLZ620T