B Le N D Ing Tips; Cleaning And Maintenance - SOLIS PERFECT BLENDER 8328 Mode D'emploi

B LE N D ING TIPS

▲ ■
The lid and the measuring cup seal should always be in place on the blender jug
● ▲
during use. The measuring cup seal should only be taken off when warm foods
are processed (see article 59 on page 77). If the volume of the foods lies under
the Max-marking during the blending process and you want to fill more food
into the blender jug, it is enough to remove the measuring cup seal (turn in a
counter-clockwise direction towards "open"). You can add the foods through
the opening in the lid. After that, put the measuring cup back in place and clock
wisely screw it all the way in (towards "lock").
GB
Never remove the blender jug or the blender container while the appliance is
● ▲
switched on. Vice versa, do not place the blender jug or the blender container
on the motor base while the appliance is switched on.
Never blend boiling hot or even very hot liquids. Always allow the liquids to cool
● ▲
down first.
Always fill the liquid ingredients into the blender jug first, followed by the soft
● ▲
ingredients. Add the hard or frozen ingredients last.
Use a plastic spatula to move the ingredients clogged up around the blades,
● ▲
never use a metal tool, as it might damage the blades or the jug. Always switch
the appliance off, wait for the blades to come to a complete standstill and dis-
connect the power plug before opening the blender jug. Never use your hands
to move the ingredients – risk of injury!
Let the appliance blend for a maximum of 3 minutes.
● ▲
Chopping hard foods or spices can tarnish the surface of the blender jug or the
● ▲
blender container, however, this has no effect on the blending performance of
the appliance.
Always use the Pulse function to powerfully chop hard or frozen foods or if the
● ▲
foods are too thick or rough to circulate inside the blender jug (while in Stand-
by-mode, press and hold the Power button).
Always take note of the Max-marking in the blender jug and the blender con-
● ▲
tainer when filling in liquids or foods and do not exceed it.
Before chopping ice cubes, fresh herbs, garlic or onion, bread, nuts or spices,
● ▲
always make sure that the blender jug / blender container and the blade base
are completely dry.
The blender jug is not suitable for the storage of foods. Always transfer foods
● ▲
to another vessel after blending.
Do not blend and process foods for too long and always supervise the blending
● ▲
process. The blender should only be operating for the time the foods or the
blending process need to achieve optimal final results.
86
Only fill foods into the blender jug / blender container, never anything else.
● ▲
Always pull the power plug before removing the blender vessel or reaching into
● ▲
the blender jug.
Never pour carbonated drinks into the blender jug / blender container for pro-
● ▲
cessing. Risk of injury!
Should you notice moisture or liquid on the upper part of the motor base while
● ▲
the appliance is blending, switch it off immediately with the Power button and
disconnect the power plug. Take off the blender jug and immediately wipe the
motor base and the outside of the jug dry with a dry towel or paper towel.
You can terminate the blending process at any time by pressing the Power
● ▲
button, even if the appliance is running a program.
Thicker mixtures are more efficiently pureed if the blender jug is only quarter- or
● ▲
half-full.

CLEANING AND MAINTENANCE

▲ ▲
The appliance and the blender jug / blender container should be cleaned immedi-
● ▲
ately after every use to prevent the foods from sticking to the blades, the blender
jug / blender container and the lid.
We recommend performing a coarse cleaning cycle with the automatic program
● ▲
"clean".
To do that, fill half of the blender jug / blender container with warm water, close
● ▲
it with the lid incl. the measuring cup seal resp. screw the blade base onto the
blender container and place the jug / container back on the motor base. Connect
the power plug to the power socket and select the "clean" program.
After the program has terminated, disconnect the power plug.
● ▲
Take the blender jug or the blender container off the motor base.
● ▲
For the blender jug: Open the lid, take the measuring cup out of the lid. Empty
● ▲
out the water. Unscrew the blade base.
For the blender containers: Unscrew the blade base to remove it from the
● ▲
blender container. Empty out the water.
Rinse all parts that have come into contact with foods by hand in warm dish-
● ▲
water with a soft towel or sponge. The blade base should be carefully cleaned
with a cleaning brush.
After that, rinse everything in clear water and dry all parts. You can clean the
● ▲
blender jug / the blender containers with the lid and the measuring cup seal as
well as the blade base in the dishwasher at a regular rinsing program. The lid and
the measuring cup seal should be placed in the upper drawer of the dishwasher.
GB
87