Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ST AR TIN G U P
▲
▲
Place the motor base on a solid, even, dry, stable and moisture resistant work
●
▲
surface.
Choose a suitable blending vessel.
●
▲
When using the blender jug, screw the blade base onto the lower part of the
●
▲
blender jug.
Fill the blender jug / blender container with the foods resp. the liquid. Always
●
▲
GB
pour the liquid ingredients into the vessel first, followed by the softer ingredi-
ents. Always add the solid or frozen ingredients resp. ice cubes to the vessel last.
Close the blender vessel:
●
▲
Close the blender jug with the lid, making sure that the spout is covered by
the lid. Then, place the measuring cup in the lid so that both nibs glide into the
recesses. Fasten the measuring cup by turning it in a clockwise direction (towards
"lock") until it locks into place.
Caution: If the measuring cup is not turned all the way in, the jug contents
might splash out!
If you want to use the blender containers for blending, screw the blade base
firmly onto the container.
Place the blender jug / blender container on the motor base so that the grey nib
●
▲
on the edge of the vessel glides into the recess and the drive screw of the blade
base is properly connected to the motor clutch.
Fully unwind the power cord and connect the power plug to a suitable power
●
▲
outlet: a long signal sound and the symbol for the blender vessel placed on the
appliance lights up in the display, along with the "vegetable" program.
Note: The appliance can identify the blender jug or one of the two blender con-
tainers thanks to magnets installed into the vessels. The corresponding symbol
lights up in the display:
Blender jug
Blender container 600 ml or 400 ml
82
CH OOSI NG A PRO GRAM
▲ ■
You can now choose one of the following programs:
●
▲
If the blender jug is placed on the motor base:
vegetable, smoothies, masher, sauce, clean
If one of the blender container is placed on the motor base:
vegetable, smoothies, sauce, clean
Note: With a blender container on the motor base, the "masher" program
(mashing / pureeing) cannot be selected.
Once the appliance is plugged in or you press the Power button while the
●
▲
appliance is in standby mode, the standard setting "vegetable" lights up in the
display.
If you want to select a different program, press the + or − button. Each press of
●
▲
the button switches the display to the next program.
When the right program lights up in the display, you can decide whether you
●
▲
want to blend in the pre-set program or if you want to manually modify this
pre-set program.
1 . SE LECTING A PRE- S ET PROGRAM:
Once the desired program lights up, e.g. "vegetable", press the Power button,
the appliance runs the pre-set blending program. The display states the speed
and a time indicator. Once the program has terminated, a check mark lights up
and a signal sounds.
2 . MAN UAL LY MODIF YING A PROGRAM:
You can change every pre-set program by changing the blending speed and/or
the blending time. To do that, proceed as follows:
Once the desired program (e.g. "smoothies") has been selected with the + and
●
▲
− buttons and lights up in the display, press the mode button. The display states
"Time" and the standard settings "60 sec" by the blender jug and "30 sec" by
the blender containers.
GB
83
Publicité
Table des Matières
