Fuse Replacement; Resetting The Unit - Sony WX-920BT Mode D'emploi

2
Mount the unit onto the bracket .

Note
If the catches are straight or bent outwards, the unit will
not be installed securely and may spring out.
Mounting the unit in a Japanese car
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
Sony dealer.

Bracket
Parts supplied with
your car
When mounting this unit to the preinstalled
brackets of your car, use the supplied screws  in
the appropriate screw holes based on your car:
T for TOYOTA and N for NISSAN.
Note
To prevent malfunction, install only with the supplied
screws .

Resetting the unit

For details, see "Resetting the Unit" (page 7).
34
GB

To the dashboard/center console
Bracket

Fuse replacement

When replacing the fuse, be sure
to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
check the power connection and
replace the fuse. If the fuse blows
again after replacement, there
may be an internal malfunction. In such a case,
consult your nearest Sony dealer.

Fuse (10 A)