Using Voice Recognition (Android Smartphone Only); Using Siri Eyes Free - Sony WX-920BT Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 74
Selecting the source or application
You can operate to select the desired source or
application on iPhone/Android smartphone.
To select the source
Press SRC repeatedly. Alternatively, press SRC,
rotate the control dial to select the desired source,
then press ENTER.
To display the source list
Press SRC.
Announcement of SMS by voice guide
(Android smartphone only)
Messages of SMS are automatically read out
through the car speakers when they are received.
For details on settings, refer to the help of the
application.
Replying a message of SMS (Android
smartphone only)
You can reply a message by touching the reply icon.
1
Activate the "Sony | Music Center" application,
then touch the [Reply] (reply) icon.
The message input display appears on the "Sony |
Music Center" application.
2
Input a reply message by voice recognition.
The list of message candidates appears on the
"Sony | Music Center" application.
3
Rotate the control dial to select the desired
message, then press it.
The message is sent out.
Making sound and display settings
You can adjust the settings relating to sound and
display via iPhone/Android smartphone.
For details on settings, refer to the help of the
application.
16
GB
Using Voice Recognition
(Android smartphone only)
1
Press and hold VOICE to activate voice
recognition.
2
Say the desired voice command into the
microphone.
To deactivate voice recognition
Press VOICE.
Notes
 Voice recognition may not be available in some cases.
 Voice recognition may not work properly depending
on the performance of the connected Android
smartphone.
 Operate under conditions where noise such as engine
sound is minimized during voice recognition.

Using Siri Eyes Free

Siri Eyes Free allows you to use an iPhone
handsfree by simply speaking into the microphone.
This function requires you to connect an iPhone to
the unit via BLUETOOTH. Availability is limited
iPhone 4s or later. Make sure that your iPhone is
running the latest iOS version.
You must complete BLUETOOTH registration and
connection configurations for the iPhone with the
unit in advance. For details, see "Preparing a
BLUETOOTH Device" (page 7).
To select the iPhone, press MENU, then select
[BLUETOOTH]  [AUDIO DEV] (page 20).
1
Activate the Siri function on the iPhone.
For details, refer to the operating instructions
supplied with the iPhone.
2
Press and hold VOICE for more than 2
seconds.
The voice command display appears.
3
After the iPhone beeps, speak into the
microphone.
The iPhone beeps again, then Siri starts
responding.
To deactivate Siri Eyes Free
Press VOICE.

Publicité

Table des Matières
loading

Table des Matières