Fuse Replacement; Detaching And Attaching The Front Panel - Sony CDX-G1202U Mode D'emploi

Mounting the unit in the
dashboard
Before installing, make sure the catches on
both sides of the bracket  are bent
inwards 2 mm ( 3 /
32
1 Position the bracket  inside the
dashboard, then bend the claws
outward for a tight fit.
53 mm (2

2 Mount the unit onto the bracket ,
then attach the protection collar .

Notes
• If the catches are straight or bent outwards, the
unit will not be installed securely and may spring
out.
• Make sure the 4 catches on the protection collar
 are properly engaged in the slots of the unit.
Detaching and attaching the front
panel
For details, see "Detaching the Front Panel"
(page 5).
Resetting the unit
For details, see "Resetting the Unit" (page 5).
24
GB
in).
1
182 mm (7 /
1
/ in)
8
Catch




Fuse replacement

When replacing the fuse,
be sure to use one
matching the amperage
rating stated on the
original fuse. If the fuse
blows, check the power
connection and replace the
fuse. If the fuse blows again after
replacement, there may be an internal
in)
4
malfunction. In such a case, consult your
nearest Sony dealer.
Fuse (10 A)