Thermador PCG304G Manuel D'installation page 11

Minimum 3/4" (19 mm)
9"
(229 mm)
2¾" (70 mm) Vertical Distance
Between Cutouts
(See Side View for Wood Support)
Figure 8a: Installation of 48" rangetop above two side-by-
side THERMADOR warming drawers - Model No. WD24
GAS INLET LOCATION
From left side to
centerline of gas inlet
From rear to centerline
of gas inlet
3/4" (19 mm) flex line
A manual valve must be installed external to the appliance, in an accessible
location from the front, for the purpose of shutting off the gas supply.
All Installer supplied parts must conform to Local Codes.
* 15 Amp,120 VAC dedicated electrical supply is required for 36" and 48" models with an electric griddle.
English 8
0" to 1¼"
(0 - 32 mm)
See Fig. 4
and Table
Dimension C
1⅞" (48 mm)
Horizontal Distance
Between Cutouts
5⅝ " (143 mm)
8½" (215 mm)
1/2" (12.7 mm) NPT
Plywood support
Install additional
wood support along
front edge of cutout
Figure 8b: Installation of 48" rangetop above two side-by-
side THERMADOR warming drawers - Model No. WD24
Product Rating
Label/Serial Tag
Thread sealing compound must be
resistant to Propane & Natural Gas.
11 16 "
7 /
(195 mm)
2¾" (70 mm)
minimum
between
cutouts
Figure 9: Bottom of Unit