7890_GB.book Seite 81 Montag, 1. Juli 2002 1:20 13
General notes
•
During navigation mode, radio or CD can still be heard.
The distance to the next announcement and, depending on
the setting made in "Setting the time display" on
page 112, the estimated time of arrival, the current time or
the remaining travel time are displayed at the right of the
display.
•
The unit can be switched to radio mode when route guid-
ance is in operation by pressing TUNER. Press CD to
switch to CD mode.
The navigation menu is automatically displayed when
navigation announcements are given.
•
When entering the address, only those letters, digits and
symbols which are relevant for the address are displayed.
The entries are automatically completed.
Spaces (e.g. in Bad Abbach) must be entered using the un-
derline symbol.
Letters, numbers and symbols can be selected via the mul-
tifunction buttons
to
2
bols can be selected by pressing the relevant multifunction
buttons repeatedly.
Selection can also be made using the SELECT control, as
described later in this guide.
•
NAVI quits the current menu and displays the previous
menu.
•
The route is recalculated by the system if deviation from
the route is made.
•
Press the VOL/INFO control to hear the current naviga-
tion announcement.
•
During the navigation announcement, adjustment can be
made to the volume using the VOL/INFO control and to
the tone by pressing SOUND (see page 78).
•
By briefly pressing theVOL/INFO control additional in-
formation can be requested during route guidance or the
current position when route guidance is not active See "In-
formation during route guidance" on page 101.
•
The current navigation announcement is interrupted by
pressing the VOL/INFO control.
•
If the VOL/INFO control is pressed for longer than
2 seconds during a navigation announcement, the naviga-
tion announcement switches off and route guidance con-
tinues via display only.
By briefly pressing the VOL/INFO control the navigation
. The individual sym-
:
announcements are switched on again.
•
The scroll marks
can be scrolled through using the SELECT control.
Each entry in the list shown in capital letters can be select-
ed by pressing the SELECT control.
Navigation operation
and
indicate a selection list which
81