Sony MEX-100NV Mode D'emploi page 110

7890_GB.book Seite 108 Montag, 1. Juli 2002 1:20 13
Navigation operation
Setting the time
In order to achieve correct navigation on routes requiring
guidance under time restrictions and to calculate the estimat-
ed time of arrival, it is necessary to set the GMT time trans-
mitted from satellites to the current time zone.
DURATION
T I M E
SAVE POSITION
Select in the system settings menu and confirm.
TIME
T I M E : 1 1 : 3 0 P M
0 3 . 0 3 . 1 9 9 9
24H + . !PL
Using the multifunction button
changed from the 24 hour to the 12 hour display.
T I M E : 1 1 : 3 0 P M
0 3 . 0 3 . 1 9 9 9
24H + . !PL
Using the multifunction buttons
changed every half an hour.
By pressing the SELECT control or the multifunction button
the time set is accepted.
PL
The program returns to the system settings menu.
108
Saving the position
TIME
S A V E P O S I T I O N
LANGUAGE*
Select
firm.
11:38.34E 54:49.14N
P O S I T I O N
SAVE
The current co-ordinates (degrees of longitude and latitude)
for the position are displayed.
Confirm again by pressing the SELECT control.
the time can be NAME:
24H
ABCDEFGHIJKLMNOPQRSTUVWXYZ
#$" ! 0123456789,/() .
Enter the name of the position.
Press the SELECT control for more than 2 seconds to confirm
the name entered. To confirm, the small tick
marked and the SELECT control briefly pressed.
The destination memory is automatically requested
or the time is
+
.
(see page 104).
Select the desired position in the destination memory using
the SELECT control and press to confirm.
in the system settings menu and con-
SAVE POSITION
H
can also be