NOTICE
If you push the starter button for more
than 5 seconds, the starter system could
be damaged.
Never push the starter button for more
than 5 seconds.
NOTICE
If you push the starter button while the
engine is running, the starter system
could be damaged.
Never push the starter button while the
engine is running.
NOTE:
If the engine fails to start after 5 seconds, wait
10 seconds and try again.
4. After starting, use the throttle control grip to
bring the engine to idle.
NOTICE
Continuing to operate your outboard
motor with the Caution System activated
could result in severe damage to your
outboard motor.
If the caution lamp remains lit after start-
ing the engine, check the engine oil level
and add oil if necessary. If the oil level is
correct, consult your authorized Suzuki
marine dealer.
5. Warm up the engine for about 5 minutes.
36
REMOTE CONTROL MODEL
1. Squeeze the fuel line priming bulb several
times until you feel resistance.
NOTE:
Do not squeeze the priming bulb while the
engine is running, as the carburetor may over-
flow.
2. Move the warm-up lever to the fully closed
position.
3. Turn the ignition key to the "ON" position.
4. Turn the ignition key to the "START" position.