Honda EU22i Manuel De L'utilisateur page 52

c. Loosen the carburetor drain
screw, and drain the gasoline
from the carburetor into a
suitable container.
d. Remove the spark plug maintenance cover and the spark plug cap
(see page 45).
e. Turn the engine switch to the ON position (see page 20).
f. Pull the starter grip 3 to 4 times to drain the gasoline from the fuel
pump into a suitable container.
g. Turn the engine switch to
the OFF position securely.
h. Tighten the carburetor drain screw.
3. Change the engine oil (see page 43).
4. Remove the spark plug and pour about a tablespoon of clean
engine oil into the cylinder. Crank the engine several revolutions to
distribute the oil, then reinstall the spark plug (see page 45).
5. Slowly pull the starter grip until
resistance is felt. At this point, the
piston is coming up on its
compression stroke and both the
intake and exhaust valves are
closed. Storing the engine in this
position will help to protect it from
internal corrosion.
CARBURETOR DRAIN SCREW
FUEL OFF
OFF
ENGINE SWITCH
STARTER
GRIP
FUEL OFF
OFF
49