Daily Use; Activating And Deactivating; Automatic Switch-Off; Bridge Function - Progress PAI8105E Notice D'utilisation

Masquer les pouces Voir aussi pour PAI8105E:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

8 Progress

DAILY USE

WARNING! Refer to Safety
chapters.

Activating and deactivating

Touch
for 1 second to activate or
deactivate the hob.
Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you
activate the hob,
• you spill something or put something on
the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or clean
the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the hob
again.
• you use incorrect cookware. The symbol
comes on and the cooking zone
deactivates automatically after 2
minutes.
• you do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the hob deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
, 1 - 2
3 - 4
5
6 - 9
The heat setting
To set or change the heat setting:
The hob deacti-
vates after
6 hours
5 hours
4 hours
1.5 hour
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct heat
setting.

Bridge function

The function operates when the
pot covers the centres of the
two zones.
This function connects two right side
cooking zones and they operate as one.
First set the heat setting for one of the right
side cooking zones.
To activate the function: touch
or change the heat setting touch one of the
control sensors.
To deactivate the function: touch
The cooking zones operate independently.

Automatic Heat Up

Activate this function to get a desired heat
setting in a shorter time. When it is on, the
zone operates on the highest setting in the
beginning and then continues to cook at
the desired heating setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch
(
touch a desired heat setting. After 3
seconds
comes on.
To deactivate the function: change the
heat setting.
. To set
comes on). Immediately
.

Publicité

Table des Matières
loading

Table des Matières