Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
en
Reducing the maximum crossing
over height
The robot vacuum cleaner is set as
standard so that it can negotiate a
height of up to 3/4" (20 mm).
This allows it to vacuum carpets, cross
over thresholds, etc.
If you would like to reduce this height
(down to approx. 1/4" (6 mm)) in order
to protect chair or table legs, or lamps
for example, you can deactivate the
factory default setting.
^ Press the Base button on the remote
control for at least three seconds.
"LO" will appear in the clock display.
Press the Base button again for at least
three seconds if you want to reactivate
the maximum crossing over height of
3/4" (20 mm). "HI" will appear in the
clock display.
Maintenance
,
Before any maintenance work
switch the robot vacuum cleaner off
with the OFF switch on the side.
Only use genuine accessories with
the "Original Miele" logo on them.
This will ensure that the suction
power of the robot vacuum cleaner
is maintained, giving the best
possible cleaning results.
18
Purchasing accessories
Original Miele accessories can be
ordered from Miele, your Miele retailer
or online (depending on country) at:
Ordering the correct accessories
Original Miele accessories are
identified by the "Original Miele" logo on
the packaging.
Emptying the dust box
Empty the dust box of the robot
vacuum cleaner after each use.
^ Press the dust box release button
and remove the dust box.
^ Remove the lid from the dust box.
^ Empty the dust box.
The contents of the box can be
disposed of with the normal household
waste, providing it contains general
household dust only.
Publicité
Table des Matières
