Cleaning The Seal On The Dust Box; Replacing The Seal On The Dust Box; Cleaning The Front Wheel - Miele RX1 - 4814 Mode D'emploi

Cleaning the seal on the dust box

^ Press the dust box release button
and remove the dust box.
^ Clean the seal on the bottom of the
dust box with a damp cloth.
^ Replace the dust box in the robot
vacuum cleaner, making sure it clicks
into position.
In order to continue to achieve the
best possible cleaning results
replace the seal with a new one after
approx. one year.

Replacing the seal on the dust box

^ Press the dust box release button
and remove the dust box.
^ Unclip the seal from the bottom of the
dust box and carefully swing it out
until it detaches from the dust box.
^ Attach the new seal to the side and
clip it into position.
^ Replace the dust box in the robot
vacuum cleaner, making sure it clicks
into position.

Cleaning the front wheel

^ Place the robot vacuum cleaner
upside down on a level, clean
surface.
Do not lift the robot vacuum cleaner
by the area around the dust box as
it can come loose.
^ Unclip the cover.
^ Remove the front wheel.
^ Remove any threads and hairs and
clean the front wheel with the brush
end of the cleaning brush.
^ Replace the front wheel and close
the cover making sure it clicks into
position.
en
21