General Precautions; Declaration Of Conformity Of The Manufacturer; Installation Regulations - Dal Zotto SILLA Manuel Utilisateur

Š CHECK FOR THE PREsENCE OF ANY OBsTRUCTIONs BEFORE sWITCHING THE APPLIANCE ON FOLLOWING
A PROLONGED PERIOD OF INACTIVITY.
Š THE GENERATOR HAs BEEN DEsIGNED TO FUNCTION IN ANY CLIMATIC CONDITION. IN PARTICULARLY
ADVERsE CONDITIONs (sTRONG WIND, FREEzING) sAFETY sYsTEMs MAY INTERVENE THAT sWITCH THE
GENERATOR OFF. IF THIs OCCURs, CONTACT THE TECHNICAL AFTER-sALEs sERVICE AND ALWAYs DIsABLE
THE sAFETY sYsTEMs.
Š IN THE EVENT THE FLUE CATCHEs FIRE, UsE sUITABLE sYsTEMs FOR sUFFOCATING THE FLAMEs OR
REQUEsT HELP FROM THE FIRE BRIGADE.
Š THIs APPLIANCE MUsT NOT BE UsED TO BURN WAsTE
Š DO NOT UsE ANY FLAMMABLE LIQUIDs FOR IGNITION
Š THE MAJOLICAs ARE TOP QUALITY ARTIsAN PRODUCTs AND As sUCH CAN HAVE MICRO-DOTs, CRACKLEs
AND CHROMATIC IMPERFECTIONs. THEsE FEATUREs HIGHLIGHT THEIR VALUABLE NATURE. DUE TO THEIR
DIFFERENT DILATION COEFFICIENT, THEY PRODUCE CRACKLING, WHICH DEMONsTRATE THEIR EFFECTIVE
AUTHENTICITY. TO CLEAN THE MAJOLICAs, IT Is RECOMMENDED TO UsE A sOFT, DRY CLOTH. IF A DETERGENT
OR LIQUID Is UsED, THE LATTER COULD PENETRATE INsIDE THE CRACKLEs, HIGHLIGHTING THEM.

gENERAL PRECAUTIONs

DAL ZOTTO responsibility is limited to the supply of the appliance.
The installation must be carried out scrupulously according to the instructions provided in this manual and the rules of the profession.
Installation must only be carried out by a qualified technician who works on behalf of companies suitable to assume the entire responsibility
of the system as a whole. DAL ZOTTO declines any responsibility for the product that has been modified without written authorisation
as well as for the use of non-original spare parts.
It is OBLIgATORY to respect the National and European rules, local regulations concerning building matter and also fireproof rules.
NO MODIfICATIONs CAN BE CARRIED OUT TO THE APPLIANCE. DAL ZOTTO cannot be held responsible for lack of respect
for such precautions.

DECLARATION Of CONfORMITY Of THE MANUfACTURER

Object: Absence of asbestos and cadmium
We declare that the materials used for the assembly of all our appliances are without asbestos parts or asbestos derivates and that in the
material used for welding, cadmium is not present, as prescribed in relevant norm.
Object: CE n. 1935/2004 regulation.
We declare that in all products we produce, the materials which will get in touch with food are suitable for alimentary use, according to the
a.m. CE regulation.

INsTALLATION REgULATIONs

Installation of the Product and auxiliary equipment in relation to the heating system must comply with all current standards and Regulations
and to those envisioned by the law.
The installation and the relating to the connections of the system, the commissioning and the check of the correct functioning must be carried
out in compliance with the regulations in force by authorised professional personnel with the requisites required by the law, being national,
regional, provincial or town council present in the country within which the appliance is installed, besides these present instructions.
Installation must be carried out by authorised personnel who must provide the buyer with a system declaration of conformity and will assume
full responsibility for final installation and as a consequence the correct functioning of the installed product.
The Product, assembled and ready for the installation, must be connected with a junction to the existing flue of the house. The junction must
be possibly short, straight, horizontal or positioned a little uphill. The connections must be tight.
18
ENgLIsH