Hornbach 10252573 Manuel D'installation Et D'utilisation page 47

III.4. Adjustment of limit switches (OPTIONAL)
The awning is delivered with pre-set limit switches. This procedure is optional.
It could also be followed if the limit switches are accidently reset.
Setting the closed limit position (the up limit)
Limit of closed position exceeded
Press down ▼
1.
2. Rotate the yellow adjusting knob anti-clockwise
( towards "+" direction)
Press up ▲
3.
✓ Closed position limit set
Press up ▲ to fully close the awning.
+
-
Limit of closed position not reached
Press up ▲
1.
2. Rotate the yellow adjusting knob clockwise
(towards the "-" direction)
✓ Closed position limit set
+
-
ENGLISH | 47