The brackets should be installed on a flat surface following a horizontal line. Failing to satisfy this
condition will result in fast degradation or improper operation of the awning.
II.3. Mounting the awning on the brackets
Wall mounting
Mount the awning on the brackets, and
secure it with the screws (one screw on
each side of the awning)
Ceiling mounting
Assemble the wall brackets with the
ceiling brackets.
Mount the brackets on the ceiling using
the same description in the paragraph
II.2
Install the awning on the brackets and
secure it in place using the screws (one
screw on each side of the awning)
II.4. Electrical installation
The cable should be connected to the
electricity source using the appropriate
method.
This operation should be conducted by a certified technician.
42 | ENGLISH
Screw
BLUE=NEUTRAL
It's an antenna, please
BLACK=LIVE
cut off but do not wire!
BROWN=ANT
GREEN/YELLOW=EARTH