Configuration - Hornbach 10252573 Manuel D'installation Et D'utilisation

III. Configuration
III.1. Arms' pitch adjustment (OPTIONAL)
The awning is delivered with a 15 degree pitch angle which is the recommended configuration for
this awning.
Start by unscrewing the cover's two
screws located next to the arms
supports, using Allen key size 4.
Remove the cover. Repeat the same
step to remove the second cover.
To adjust the pitch angle, follow these
steps (two people are required for this
task) :
-Hold the front bar in place.
-Loosen the two main screws (by half
revolution) using size 13 wrench.
-Repeat the same procedure on the
other side of the awning.
- Using an Allen key size 6, rotate the
screw to set the desired pitch angle.
44 | ENGLISH
Cover's screws
1
2
Side cover