Hornbach 10252573 Manuel D'installation Et D'utilisation page 45

Adjust the distance X to meet the
desired pitch angle.
Note: it is recommended to use a
measuring tool with
precision (e.g. a caliper).
The table contains the X values for
each pitch angle.
- Repeat the same procedure with
the second arm.
- Make sure that the front bar is
leveled (otherwise, make sure that
the X values are similar from both
sides).
-Tighten the two main screws using
size 13 wrench.
-Repeat the same procedure on the
other side of the awning.
Note: For safety reasons, only
individuals adjusting the product
should be allowed under the
awning.
a good
2
Pitch angle [deg]
10
15
20
25
30
35
40
45
50
55
60
1
X
4
8
12
16
19
22
25
29
32
36
39
ENGLISH | 45