3.4 Removal of freezing baskets and wire shelves from the freezer
1
1
3.5 Cleaning the interior
2
1
1
2
Some of the freezing baskets have a limit
stop to prevent their accidental removal or
falling out. At the time of its removal from
the freezer, pull the basket towards your-
self and, upon reaching the end point, re-
move the basket by tilting its front up-
wards
At the time of putting it back, slightly lift
the front of the basket to insert it into the
freezer.
Once you are over the end points, push
the basket back in their position.
The wire shelves equipped with expander
rollers are secured with locking pins.
To remove them proceed as follow:
• Loosen the locking pin on each side on
the expander roller. If necessary, use a
screwdriver.
• Then pull out both locking pin (1).
• Then pull the wire shelf outwards (2).
Before using the appliance for the first
time, wash the interior and all internal ac-
cessories with lukewarm water and some
neutral soap so as to remove the typical
smell of a brand-new product, then dry
thoroughly.
Do not use detergents or abrasive
powders, as these will damage
the finish.
Check that the drain hose at the rear of
the cabinet discharges into the drip tray
ENGLISH
63