ASSEMBLY STEP 4
HARDWARE FOR STEP 4
PART
TYPE
A
BOLT
B
SPRING WASHER
C
FLAT WASHER
(STEP E)
5
1
DESCRIPTION
QTY
M8X1.25PX15L
4
8.2X13.5X2.0T
4
8.2X15.0X1.2T
4
6
4
A B C
4
NOTE: Be careful not to pinch any wires
while assembling the console.
A
Open HARDWARE FOR STEP 4.
B
Gently place the CONSOLE (5) on top of the
CONSOLE MASTS (1&4). Attach the LEFT SIDE
first using 2 BOLTS (A), 2 SPRING WASHERS
(B) and 2 FLAT WASHERS (C).
C
The CONSOLE CABLES (6) are tucked into
the CONSOLE MAST (4). Using the lead wire
carefully pull the CONSOLE CABLE (6) out of the
CONSOLE MAST (4). Detach and and discard the
LEAD WIRE. Connect the CONSOLE CABLES (6)
and carefully tuck wires in masts to avoid damage.
D
Attach the RIGHT SIDE of the CONSOLE (5) using
2 BOLTS (A), 2 SPRING WASHERS (B) and 2
FLAT WASHERS (C).
E
Pull the top of the CONSOLE (5) towards the back
of the treadmill and HOLD while TIGHTENING THE
LEFT AND RIGHT SIDE BOLTS (A).
A
C
B
13