Horizon Fitness T202 Manuel Du Propriétaire page 11

ASSEMBLY STEP 2
HARDWARE FOR STEP 2
PART TYPE
A HEX SOCKET BOLT
A
4
3
2
DESCRIPTION QTY
M8X1.25PX60L 3
A
A Open HARDWARE FOR STEP 2.
B Pull the CONSOLE CABLE (3) away from the
treadmill base frame. Connect the CONSOLE
CABLE (3) from the MAIN FRAME (2) to the
CONSOLE CABLE (3) in the bottom of the
RIGHT CONSOLE MAST (4). The other end
of the CONSOLE CABLE (3) should be located
at the top of the mast.
C Attach RIGHT CONSOLE MAST (4)
to MAIN FRAME (2) using 3 BOLTS (A).
NOTE: Be careful not to pinch the console
cable while attaching the right console mast.
NOTE: Do not fully tighten bolts until STEP 5.
11