Button(S) Description - VINCENT SV-500 Manuel D'utilisation

Operation
Change the bass pro-
portions of the sound
Switch off tone control
(BASS/TREBLE)
Vincent
38
OPERATING THE APPLIANCE
Button(s) Description
With the "BASS" control dial on the front of the device you affect the pro-
portion of lower frequencies in the sound. Turning it in clockwise direction
increases the bass intensity and moving it in anticlockwise direction redu-
ces it. In the middle setting the bass proportions of the input signals remain
BASS (4)
unchanged. The adjustment of the bass control only has an effect if the but-
ton "TONE" (5) has been pressed. This tone control affects the loudspea-
ker and headphone signals as well as the output "PRE OUT" (13). The
signal of the output "REC OUT" (11) is independent of this.
If the sound is not to be changed, it is recommended that you switch off
the sound control (BASS, TREBLE) with this button on the front of the devi-
ce. When this button is pressed, the sound processing settings in the tone
controllers (4)(6) come into play. If the button is not pressed, the two
TONE (5)
sound controllers in the preamplifier are bypassed and the signals from the
source are not changed in terms of their frequency levels. The tone control
affects the signal of the loudspeakers and the "PRE OUT" output (13). The
signal of the "REC OUT" output (11) is unaffected by this.