Button(S) Description - VINCENT SV-238MK Manuel D'utilisation

Operation
Change the
channel balance
Change the brightness
of the front panel
display
OPERATING THE APPLIANCE

Button(s) Description

One channel of the system (right or left) and thus one of the loudspeakers can
be adjusted to be louder than the other one. That may be wanted if your
favourite listening position in the room is closer to one speaker than to the
other one resulting in a difference in perceived volume. This balance adjust-
ment can only be made using the corresponding remote controller buttons.
Press, if necessary repeatedly, the button "BAL L" to boost the left channel
BAL-L /
volume compared to the right channel volume. "BAL R" can be used to
BAL-R (16)
boost the right channel volume. While doing this, the display reads the cur-
rent BALANCE value and the side (R: right or L: left) to which the BALAN-
CE has been moved. In the middle position of the setting where both spea-
ker channels have equal amplification a double marking appears in the
display.
L-|-----------R
This function can only be operated using the associated remote control but-
ton. When repeatedly pressed, the display (2) brightness is reduced in two
DIMMER
steps (1x, 2x), switched off (3x) and restored to the original, maximum
(13)
brightness (4x).
... L------||------R ... L-----------|-R
Vincent
39