VINCENT SV-500 Manuel D'utilisation page 27

2
1
1. POWER: Mains switch
This is the main power switch for turning on and
off the device. When switched off, the device is
disconnected from the mains. The switching ope-
ration is signalled via the cables connected in the
terminal "POWER CONTROL" (14).
2. INPUT: Input Selector
One of the six audio sources connected to the
amplifier inputs can be selected for playback
here. The LED above the dial associated with the
selected input is lit as long as the amplifier
remains switched on and is not muted.
3. PHONES
If desired, you can connect a set of headphones
with an impedance between 32 Ω and 600 Ω to
this stereo jack. As long as the headphones are
plugged in, the loudspeakers are switched off.
The volume of the headphone can be changed
with the rotary knob "VOLUME" (8)(21). Before
plugging-in a headphone, the volume setting
should be reduced.
FRONT VIEW
3 4 5 6
4. BASS
For setting the bass proportions (low frequencies)
of the sound.
5. TONE
Bypasses the tone control that has been set with
the BASS and TREBLE dials.
7. Infrared receiver for the remote control
8. VOLUME
The volume of the loudspeakers and the speakers
may be increased or decreased with this knob.
9. MUTE
Pressing this button once mutes the speakers, the rec-
ording output (11) and the preamplifier output (13).
Pressing it again returns to the original volume.
8
7 9
Vincent
27