Automatic Cooking; Pause Function - BORETTI BIK-79 Notice D'emploi


Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the key [ 00 ].

Egg timer function:
Example for 29 minutes:
Action
Activate the hob
Select« Timer »
Set the units
Valid the units
Set the tens
Valid the tens
After a few seconds the control light stops with blinking.
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the display [ 00 ]. The hob switches off.

Automatic cooking

All the cooking zones are equipped with an automatic "go and stop" cooking device. The cooking
zone starts at full power during a certain time, then reduces automatically its power on the pre-
selected level.

Start-up:
Action
Zone selection
Full power setting
Automatic cooking
Power level selection
(for example " 7 ")

Switching off the automatic cooking:
Action
Zone selection
Power level selection

Pause function

This function brakes all the hob's cooking activity and allows restarting with the same settings.

Startup/stop the pause function :
Action
Engage pause
Stop the pause
Control panel
press display [ ]
press display [ CL ]
slide on the "SLIDER" to [ 9 ]
press display [ 09 ]
slide on the "SLIDER" to [ 2 ]
press display [ 29 ]
Control panel
press display [ 0 ] selected
slide on the "SLIDER" to [ 9 ]
re-press on display "SLIDER" [ 9 ]
slide on the "SLIDER" to [ 7 ]
Control panel
press [ 7 ] from the zone
slide on the "SLIDER"
Control panel
press "Pause/Recall" key
during 2s
press "Pause/Recall" key
during 2s
press an other touch or
slide on the "SLIDER"
60
Display
zone control lights are on
[ 00 ]
[ 0 fixed ] [ 9 blinking ]
[ 0 blinking ] [ 9 fixed ]
[ 2 blinking ] [ 9 fixed ]
[ 29 ]
Display
[ 0 ] and control light on
pass from [ 0 ] to [ 9 ]
[ 9 ] is blinking with [ A ]
[ 9 ] pass to [ 8 ] [ 7 ]
[ 7 ] is blinking with [ A ]
Display
[ 7 ] blinking with [ A ]
[ 1 ] to [ 9 ]
Display
displays [ II ] in the
heating zone displays
pause control light is
blinking
pause control light is off