Electrical Connections; Technical Information - AEG MW17E10M Notice D'utilisation

124
www.aeg.com
9.4 Electrical connections
WARNING!
THIS APPLIANCE MUST BE
EARTHED
The manufacturer declines any liability
should this safety measure not be
observed.
10. TECHNICAL INFORMATION
AC Line Voltage
Distribution line fuse/circuit breaker
AC Power required:
Output power:
Microwave Frequency
Outside Dimensions:
Cavity Dimensions
Oven Capacity
Turntable
Weight
Oven lamp
1)
This Product fulfils the requirement of the European standard EN55011.
In conformity with this standard, this product is classified as group 2 class B equipment.
Group 2 means that the equipment intentionally generates radio-frequency energy in the form of
electromagnetic radiation for the heat treatment of food.
Class B equipment means that the equipment is suitable to be used in domestic establishments.
2)
Internal capacity is calculated by measuring maximum width, depth and height.
Actual capacity for holding food is less.
This oven complies with the requirements of Directives 2004/108/EC, 2006/95/EC,
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AS PART OF
If the plug that is fitted to your
appliance is not suitable for your socket
outlet, you must call your local AEG
service agent.
230 V, 50 Hz, single phase
Minimum 10 A
Microwave 1.2 kW
Microwave 800 W (IEC 60705)
2450 MHz
MW17E10M
594 mm (W) x 371 mm (H) x 316 mm (D)
MW17E10B
285 mm (W) x 202 mm (H) x 298 mm (D)
17 litres
ø 272 mm, glass
approx. 16 kg
25 W/240-250 V
2009/125/EC and 2011/65/EU.
CONTINUOUS IMPROVEMENT
1) (Group 2/Class B)
2)
2)