Connecting Strap - TEMPUR-PEDIC ERGO EXTEND Manuel Du Propriétaire

connecting strap (optional)
OVERVIEW
If a split setup is being installed, plastic connecting straps are provided (one per base) to
secure the bases together. Use both straps to secure the head and foot portions together.
STEP 1
With the bases in their desired location, slightly loosen
both legs to allow the strap to fit on the leg bolt, between
the leg washer and frame.
14
Connecting straps are secured to the base frame upon delivery.
STEP 2
Slide side (a) of the connecting strap onto leg bolt. Swing
the strap and connect side (b) to the leg bolt. Secure the
strap by shifting to the left.
STEP 3
Re-tighten legs. Do not over tighten. Use the remaining
strap on other end of the base.
a
b