TEMPUR-PEDIC ERGO EXTEND Manuel Du Propriétaire page 12

divided base installation guide
Always use two people when setting up the base.
(2) Long Bolts
STEP 1
Push and align the head and foot sections together. Make sure
to align the leg thread holes with top frame as seen in Fig. A and
side hole as seen in Fig. B.
8
(2) Washers (2) Wing Nuts
Fig. A Fig. B
STEP 2
Once aligned, slide long bolt through the side hole shown in Fig.
C and Fig. D. Secure bolt using one of the washers and wing nuts
provided. Repeat this step for the other side of the base.
Fig. C
STEP 3
Attach the legs by screwing them into the leg threads. Do this on
all four corners and both sides of the middle section.
Fig. E
To install King/Cal King Headboard Brackets (sold separately) see
instructions on page 16-17.
Fig. D
Fig. F