TEMPUR-PEDIC ERGO EXTEND Manuel Du Propriétaire page 6

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

safety precautions and usage statements
OUTPUT:
DC 29V 2.0A
WATTS:
58W
Product Ratings:
The lift motors are not designed to operate continuously for more
than two [2] minutes in an eighteen [18] minute time period or
approximately 10% duty cycle. Attempting to circumvent or exceed
this rating will shorten the life expectancy of the product and may
void the warranty.
The massage motors are not designed to operate continuously for
more that 30 minutes at a time. Please allow the massaging system
to rest for 30 minutes after automatic massage shut off before
restarting.
Weight Limits:
The recommended weight limits on the TEMPUR-PEDIC ERGO
EXTEND
are:
TM
Twin Long / Queen / King / Split CA King / CA King: 850 pounds.
Maximum weight the bed can support per person is 350 pounds with
the weight evenly distributed across the head and foot sections. This
product is not designed to support or lift this amount of weight in
the head or foot sections alone. NOTE: Exceeding the recommended
weight restrictions could damage your TEMPUR-PEDIC ERGO
EXTEND
and void your warranty. For best performance, you should
TM
enter and exit the TEMPUR-PEDIC ERGO EXTEND
flat or fully lowered position.
TEMPUR-PEDIC ERGO EXTEND
furniture beds and platform beds that are certified to hold a
minimum of 1000 pounds. If using this adjustable base without the
legs and placing directly on a bed frame or platform bed, cross-bed
supports (slats) are strongly recommended to ensure TEMPUR-
PEDIC ERGO EXTEND
maintains stability during operation.
TM
Exceeding this weight restriction could damage the bed
and/or cause injury and will void the warranty.
2
while it is in the
TM
fits easily inside bed frames,
TM
Acoustics:
In normal base operation the wheels, which allow the bed to
maintain its distance from the wall, will make contact with the
steel platform supports of the base creating a contact noise. When
entering, exiting or shifting weight on the base, this contact noise
may be audible as the wheels make contact. This is normal.
Fabric Care:
To prolong the life of your fabric, protect from direct sunlight
whenever possible. For spot cleaning, wipe area with a light damp
sponge or vacuum with a soft brush attachment to remove particles.
Keep at a minimum of 30cm (12 inches) away from direct heat
sources.
For deeper cleaning, blot liquid spills with a clean dry cloth.
Wipe with a clean cloth dampened with warm water. Do not wet
excessively. A soft bristle brush may be used to remove ingrained
soil. Avoid scratching by gentle brushing. Wipe with a clean cloth
dampened with warm water to remove residues after brushing. Dry
in shade away from direct heat.
If persistent marks remain visible after cleaning, seek professional
advice.
FCC Compliance:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna
or the device could result in the device exceeding the RF exposure
requirements and void user's authority to operate the device.
Radio Frequency: 2.4 GHz
CAN ICES-3 (B)/NMB-3(B)

Publicité

Table des Matières
loading

Table des Matières