Connecting Strap - TEMPUR-PEDIC UP 2.0 Manuel Du Propriétaire

connecting strap (optional)
If any split setup is being installed, plastic Connecting Straps are provided (one per base)
STEP 1
With the bases in their
desired location, slightly
loosen both legs to
allow the strap to fit on
the leg bolt, between
the leg washer and
frame.
to secure the bases together.
STEP 2
Slide side (a) of the Connecting Strap onto leg bolt. Swing the
strap and connect side (b) to the leg bolt. Secure the strap by
shifting to the left.
STEP 3
Re-tighten legs. Do not over tighten. Use the remaining strap
and repeat on other end of the base.
a
b
9