Important Information • Package - AERMEC Omnia HL PC Manuel D'utilisation Et D'installation

IMPORTANT INFORMATION
IMPORTANT: OMNIA fan coils
are designed for indoor use.
IMPORTANT: the fan coil is
connected to power supply
and water circuit. Operations per-
formed by persons without the
required technical skills can lead
to personal injury to the operator
or damage to the unit and sur-
rounding objects.
IMPORTANT: components sen-
sitive to static electricity may
be destroyed by discharges nota-
bly lower than those at the human
perception threshold. These dis-
charges form when you touch a
component or electric contact
of a unit, without first discharg-
ing accumulated static electric-
ity from your body. The damage
caused to the unit by an overvolt-
age is not immediately evident, it
only appears after a certain peri-
od of operation.
S T A T I C E L E C T R I C I T Y
ACCUMULATION
Any person not connected in a con-
ductive manner with the electronic
potential of his surrounding envi-
ronment can accumulate electro-
static charges.
S T A N D A R D P R O T E C T I O N
AG A I N S T E L E C T R O S TAT I C
CHARGES
Earthing quality
When working with units sensi-
tive to electrostatic electricity,
ensure that people, workplaces
and unit casings are correctly
earthed. This will prevent the for-
mation of electrostatic charges.
Avoid direct contact
Only touch the element exposed
to electrostatic risk when abso-
lutely essential (e.g.: for mainte-
nance).
Touch the element without com-
ing into contact with either the
contact pins or the wire guides.
If you follow this rule, the energy
of the electrostatic charges can-
not reach or damage the sensitive
parts.
PACKAGE
The fan coils are shipped in stand-
ard package which consists of
Before taking measurements
on the unit, it is necessary to
discharge all electrostatic charges
from your body. To do this, just
touch an earthed metal object.
Only use earthed measuring
instruments.
POWER THE FAN COIL ONLY
WITH 230V, SINGLE-PHASE
VOLTAGE
Any other type of power supply
could permanently damage the fan
coil.
DO NOT USE THE FAN COIL
IMPROPERLY
Do not use the fan coil for animal
husbandry applications (e.g. incu-
bation).
AIR THE ROOM
Periodically air the room in which
the fan coil has been installed.
This is particularly important if the
room is occupied by many people,
or if gas appliances or sources of
odours are present.
ADJUST TEMPERATURE ADE-
QUATELY
The room temperature should be
adjusted in order to provide maxi-
mum comfort to the people in the
room, especially if they are elder-
ly, children or sick people; avoid
differences over 7°C between the
outdoor temperature and the tem-
perature inside the room in sum-
mer.
In summer, a temperature that is too
low causes higher electrical con-
sumption.
CORRECTLY ADJUST THE AIR JET
Air coming out from the fan coil
must not reach people directly; in
fact, even if the air is warmer than
the room temperature, it could
cause a cold sensation and result
in discomfort.
DURING OPERATION
Always leave the filter fitted on
the fan coil during operation
(otherwise dust in the air could
soil the coil surface area).
WHAT IS NORMAL
expanded polystyrene foam and
cardboard shells.
In the cooling operation, water
vapour may be present in the air
delivery of the fan coil.
In the heating operation, a slight
hiss might be heard close to the-
fan coil. Sometimes the fan coil
might give off unpleasant smells
due to the accumulation of sub-
stances present in the air of the
room (clean the filter more often,
especially if the room is not venti-
lated regularly).
While the unit is functioning, there
could be noises and creaks inside
the device due to the various ther-
mal expansions of the elements
(plastic and metal), but this does
not indicate any malfunction and
does not damage the unit unless
the maximum input water temper-
ature is exceeded.
MALFUNCTIONING
In the event of a malfunction,
cut off power supply to the unit,
then restore the power and start
the unit again. If the problem
occurs again, call the local After-
Sales Service immediately.
DO NOT TUG THE ELECTRIC
CABLE
It is very dangerous to pull,
tread on or crush the electric
power cable, or fix it with nails or
drawing pins.
A damaged power cable can
cause short circuits and injure
people.
DO NOT OBSTRUCT THE
AIR OUTLETS BY PLACING
OBJECTS INTO THEM
Do not put anything in the air outlet
slots.
This could injure people and dam-
age the fan.
IHLPCLJ 1809 - 6887206_04
19