Before You Begin; Connecting To An External Amplification System; Using The Headphones - Korg SP-300 Mode D'emploi

Connecting to an external amplification system
Use the OUTPUT connectors, if you like to connect your SP-300 to a high-quality
mixer, stereo hi-fi, or a couple of active monitors. When using a stereo hi-fi, connect
the OUTPUTs to the AUX or TAPE inputs (never use the PHONO inputs). For
mono amplification, connect only the L/MONO output.
to an AC outlet

Using the headphones

For playing or practicing during night hours, or when you don't want to be heard by
others in the same room, connect one or two pairs of high-quality headphones (32Ω
impedance suggested) to the appropriate connectors on the rear panel. These con-
nectors are standard 1/4" phone jacks. If your headphones have a mini-jack adapter,
grasp the adapter when plugging in or out the headphones.
Warning: When using headphones, protect your hearing by avoiding extended lis-
tening at high volumes.
12
CHAPTER

Before you begin

L/MONO
R
DC IN
12 V
OUTPUT
2
Powered
monitors, etc.
Mini conponent/
stereo, etc.
AUX IN
Chapter 2