Before You Begin Playing - Korg LP-180 Manuel D'utilisation

Before you begin playing

Figure 1 Cord hook
DC plug
Be careful not to
bend this part too
much when you
insert the power
cord.
AC adapter
Power cord for
the AC adapter
To AC
outlet
Figure 2
A
A
Figure 3
VOLUME knob
Power LED
Power Button
Figure 4
Figure 5
Phones jacks
About the included stand
The LP-180 is used with the included stand.
stand" section that can be found on page 8 before proceeding.
1. Connecting the Power (Figure 1)
• Connect the supplied AC adapter to the power cord. Insert the DC plug end into the DC12V
jack on the rear panel of the unit. Next, plug the power cord into an AC outlet.
Pass the AC adapter cord through the cord hook so that the plug won't be removed from
the jack accidentally. When you unhook the cord, don't pull the cord with force.
Be sure to use the AC adapter that came with your unit. Using other AC adapters may
cause the unit to malfunction.
Be sure to plug the unit into an AC outlet of the appropriate voltage.
2. Opening or closing the key cove (Figure 2)
Put your fingers on the depressed part "A" on the front panel to
slowly open the key cover with your hands.
Be careful not to pinch your fingers or hands when closing the
key cover.
3. Turning the LP-180 ON
• Press the power button to turn on the LP-180. (Figure 3)
The power LED will light up. (Figure 3)
• Press the power switch again to turn the unit off.
The power LED will go dark.
This instrument is automatically turned off when 30 minutes have passed without user
input or without a demonstration song played. Press the POWER button to turn the instru-
ment on when using it again. In addition, this function cannot be disabled.
4. Adjust the volume
• Rotate the VOLUME knob that's located next to the power switch to the right, toward "MAX",
to raise the volume level. Rotate it left toward "MIN" to lower the level. (Figure 3)
The VOLUME knob controls the output level of the built-in speakers and the headphone
jacks.
Using the music stand
• The key cover serves as a convenient music stand. (Figure 4)
When placing open sheet music, do not apply strong pressure onto the key cover.
Using headphones
When you plug in headphones, the built-in speakers will be muted. This is useful when you
want to play the keyboard without bothering your family or your neighbors. The LP-180
features two headphone jacks so that two people can enjoy playing and listening.
• Insert the stereo headphone plug into the phones jacks ( ) on the lower left side of the
unit. (Figure 5)
If your headphones feature a standard-to-mini adapter plug, be sure to hold the adapter
plug when you connect or disconnect the headphones.
To protect your hearing, do not listen to loud, high-volume sounds for a long period of
time through headphones.
Make sure that you read the "Assembling the
3