Table des Matières
Publicité
1
2
3
4
5
214
4
2
5
1
DISPLAY
± 0
DARK
LIGHT
RETURN
Other Useful
Features
Adjusting Brightness of
Picture
Immediately after inputting titles or changing the
settings of Initialize Mode or Display Mode (While the
system is inputting the titles or data automatically) do
not turn the ignition key (engine key) to OFF.
Otherwise, the title may not be written, or the settings
may not be changed.
Note: The Parking Brake must be ON to access the
3
display mode screen. Trying to access this
screen while driving will display the warning-
CAN'T OPERATE WHILE DRIVING.
You can adjust the volume level while the
Display mode screen is shown by first
pressing the rotary encoder and then rotating
the rotary encoder.
Press the SOURCE button.
The main menu appears on the display.
Press the 5 (DISPLAY) button.
The Display mode screen appears.
Rotate the rotary encoder and select "BRIGHT" to
activate the Brightness Adjustment mode.
The display shows the Function Guide.
Press the 1 (; DARK) to make the picture darker
or press the 3 (LIGHT :) to make the picture
brighter. You can adjust the brightness between
MIN (–15) and MAX (+15). When it reaches the
minimum or maximum point, the display shows
"MIN" or "MAX" respectively. To quickly set to the
centre position, press the 2 (±0) button.
When the adjustment has been completed, press
the FUNC (RETURN) button. The display returns
to the main menu screen.
English
Publicité
Table des Matières
