Manual Storing Of Station Presets - Alpine IVA-C800R Mode D'emploi

1
2
3
4
44
2 3
1/2
PAGE
1 2 3 4
P.SET P.SET P.SET P.SET
1 2 3 4
P.SET P.SET P.SET P.SET
Radio Operation
Manual Storing of Station
Presets
A total of 30 stations can be stored in the preset
1
memory (6 stations for each band; FM1, FM2,
FM3, MW or LW).
Tune in a desired radio station you wish to store
in the preset memory by manual or automatic
seek tuning.
Press the FUNC (PAGE 1/2) button.
Press and hold any one of the Function buttons
5 6
P.SET P.SET
1 (P.SET1) through 6 (P.SET6) for at least 2
seconds. The Function Guide indicators in the
display, P.SET1 through P.SET6, will blink for 5
seconds.
While the P.SET1 through P.SET6 indicators in
5 6
the display are blinking, press the Function
P.SET P.SET
button into which you wish to store the station
(within 5 seconds). The indicators in the display
stop blinking, showing that the station has been
memorized at the Preset button pressed.
Repeat the above procedure (1 to 3) to store up
to 5 other stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
Note: If a preset memory has already been set
in the same Function button, it will be
cleared and the new station will be
memorised.
English