Table des Matières
Publicité
6
7
8
152
RETURN
Audio Processor
Operation (Optional)
Press the rotary encoder and select the channel
that you wish to adjust.
Each press changes the channel as follows.
When only one 2-way divider is connected:
→ Low → F-High → R-High
When two 2-way dividers are connected:
→
Low
Each time the 6 (F/R) button is
↑
pressed, the mode switches between
the Front adjustment and Rear adjust-
ment modes, and the display also
↓
changes.
→
Low
When only one 3-way divider is connected:
→ Low → Mid-L → Mid-H → High
When two 3-way dividers are connected:
→ Low → Mid-L → Mid-H → High
Each time the 6 (F/R) button is
↑
pressed, the mode switches between
the Front adjustment and Rear adjust-
↓
ment, and the display also changes.
→ Low → Mid-L → Mid-H → High
Rotate the rotary encoder clockwise or
counterclockwise to adjust the Cross-Over point
upward or downward to your desired point.
When the adjustment has been completed,
press the FUNC (RETURN) button. The display
returns to the Divider mode screen.
English
→
High
→
High
Publicité
Table des Matières
