Programmes; Options - ZANKER KDT10001FB Notice D'utilisation

Indicators
End indicator.
Salt indicator. This indicator is off while the programme operates.

Programmes

1) Degree of soil
Programme
Type of load
Heavy soil
Crockery, cutlery,
pots and pans
Normal soil
Crockery and cut-
lery
Fresh soil
2)
Crockery and cut-
lery
Normal soil
3)
Crockery and cut-
lery
All
4)
1) The pressure and the temperature of the water , the variations of the mains supply, the options and the quantity of dishes
can change the values.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal
soil. (This is the standard programme for test institutes).
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to
come out from the appliance.
Do not use detergent with this programme.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

Options

Acoustic signals
The acoustic signals operate when the appliance has
a malfunction and it is not possible to deactivate them.
16
Description
Programme
phases
Prewash
Wash 70 °C
Rinses
Dry
Prewash
Wash 65 °C
Rinses
Dry
Wash 65 °C
Rinse
Prewash
Wash 50 °C
Rinses
Dry
Prewash
There is also an acoustic signal that operates when
the programme is completed. By default, this acoustic
signal is off, but it is possible to activate it.
Duration Energy
(min) (kWh)
130 - 150 1.3 - 1.4
100 - 110 1.2 - 1.6
30 0.8
195 1.02
14 0.1
Water
(l)
13 - 15
15 - 16
9
11
4