Accessories - Zenoah GZ360 Manuel D'utilisation

Recommended cutting equipment
Chainsaw model Zenoah GZ360 has been evaluated for
safety according to (Machinery for forestry - Portable
chainsaw safety requirements and testing) and fulfills
the safety requirements when equipped with the below
listed guide bar and saw chain combination(s).
Low kickback saw chain
A saw chain that is designated as Low kickback saw
chain, meets the low kickback requirement specified in
ANSI B175.1-2012.
Guide bar
Length, inch Pitch, inch
14 3/8 mini
Filing equipment and filing angles
Using Zenoah file gauge will give you the correct filing
angles. We recommend you to always use a Zenoah file
gauge to restore the sharpness of the saw chain. The
part numbers are given in the table below.
H37
321 - 004 - 27.09.2017

Accessories

Gauge, mm
1,3
4 mm 579 65 36-01
Kickback and guide bar nose radius
For sprocket nose bars the nose radius is defined by the
number of teeth (for example 10T). For solid guide bars
the nose radius is defined by the size of the nose radius.
For a given guide bar length, you may use a guide bar
with smaller nose radius than listed.
Saw chain
Max. nose ra- Type
dius
7T Husqvarna
H37
If you are not sure of how to identify what saw chain you
have on your chainsaw, please visit your servicing
dealer for more information.
0,65 mm
Length, drive Low Kickback
links (no.)
52 Yes
30° 80°
41