Vermeiren Ceres SE Manuel D'utilisation page 12

EN
NL
 When driving indoors, only use the lowest speed setting.
 Do not turn your scooter "OFF" while driving as this will lead to an emergency stop and
possible risk of accident and injury.
 Keep the braking distance in mind, see also the technical specification in chapter 6. Be aware
that the braking distance depends on speed, surface, weather conditions, slope and weight
of the user.
 Pay attention if the road has holes or gaps that may cause entrapment of the wheels.
3.2.1 Operator control
 Switch the scooter ON by turning the key.
 The battery level indicator (2) will light up and show the current level of your batteries.
 Turn the speed control switch (3) to the desired driving speed.
o Turn clockwise to increase speed control.
o Turn counterclockwise to lower speed control.
 To sound the horn, press the horn button (4).
 To switch on the front and back lights, press the light button (5).
 To switch on the emergency flashers, press button (8).
 To switch on the indicator lights, press the desired button (7) (right indicator) or (6) (left
indicator). The buzzer will make a beeping sound when turning the indicators lights on.
3.2.2 Operating the brakes
To apply the electromagnetic brakes:
1. Let go of the speed lever. The electromagnetic brake in the motor will be activated, the
scooter will stop.
To apply the manual brakes - emergency brake:
1. Pull the brake lever (1) towards the handgrip.
2. Release the brake lever.
To apply the manual brakes - parking brake:
1. Pull the brake lever (1) towards the handgrip and use
the button to lock it.
2. Squeeze the brake lever again to release the button.
The manual brake tightness can be adjusted with the brake
cable adjuster.
1
3
5
6
4
9
1. Possible problem indicator
2. Battery level indicator
2
3. Speed control (slow/fast)
4. Horn
8
5. Lights (front and rear)
6. Indicator (left)
7
7. Indicator (right)
8. Emergency lights
9. Speed levers
8
Ceres SE
2021-08
Using your scooter