Comfort Adjustments - Vermeiren Ceres SE Manuel D'utilisation

3.5

Comfort adjustments

WARNING
 Never perform adjustments while driving.
 The allowed adjustments can change the stability of your scooter (tilting back or sideways).
3.5.1 Adjusting the steering unit
WARNING
 Turn the scooter off before you adjust the angle of the steering unit.
 Do not lean with your whole body on the steering unit.
3.5.2 Adjusting the seat
WARNING
 Make sure that the seat is locked securely.
Removing the seat
1. Pull the seat lever forward.
2. Turn the seat a little bit and lift the seat out the adjustment
bar.
3. Release the seat lever.
Placing and locking the seat into place
1. Pull the seat lever forward.
2. Place the seat on the adjustment bar and, at the same time, keep the seat lever pressed in.
3. Release the seat lever.
4. Make sure that the seat is firmly secured.
Swivelling the seat
1. Pull the seat lever forward.
2. Turn the seat in the desired direction.
3. Release the seat lever. The seat will always stop after 90°.
4. Make sure that the seat is firmly secured.
Depth adjustment
1. Pull the seat depth adjustment lever upwards.
2. Move the seat forward or backward over the seat depth rails.
3. To lock the seat in place, let go of the lever once the seat
has reached the desired position.
4. Swivel the seat a little until it locks in position.
5. Make sure that the seat is locked securely.
Risk of injuries and/or damage
Risk of injury
The steering unit can be adjusted to many different positions
(stepless) to suit each driver.
1. Push the lever downwards.
2. Adjust the steering unit to the desired position.
3. Release the lever.
Risk of injury
11
EN
Ceres SE
2021-08
Using your scooter
NL