Rack Positions - Thermador PRO-HARMONY Guide D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour PRO-HARMONY:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

When placing food on a rack, pull the rack out to the
stop position. The racks are designed to lock and not
tilt when pulled forward.
Important: When placing the gliding rack in the oven,
make sure the front supports on the rack guides rest in
the large slots at the front corners of the rack. This is
necessary to keep the rack locked into position while
fully inserted into the oven.
English 20
Always
remove
before
Self Clean
Figure 21: Gliding Oven Rack
Figure 22: Rack Installation Detail
Bake Rack Positions
Rack level positions in the oven are numbered like an
elevator. Number one level is the lowest and number
five level is at the top.

Rack Positions

One Rack Baking
The Bake mode is best for baking on one rack with
rack level #3 used for most baked items. If the item is
tall, such as an angel food cake, rack level #2 may be
used. Pies are best baked on rack level #2 to make
certain the bottom of the crust is done without over
browning the top. When large pieces of meat or poultry
are roasted, such as a prime rib of beef or a turkey,
rack level #2 is the preferred rack.
Two Rack Baking
Rack levels #2 and #4 or #5 may be used when baking
on two levels. Foods such as cookies and biscuits work
well using these two racks. Casserole dishes may also
be baked using these two levels.
Three Rack Baking
If three-rack baking is desired, the Convection Bake
mode should be used.
Bakeware Placement
Allow at least 1" of space between the pans and the
oven walls so heat can circulate around each pan.
Stagger baking utensils so that one is not directly
above another. Allow 1-1/2" above and below each
pan.
3
2
1
Figure 23: Oven Rack Positions
5
4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Prg30Prl30Prg36Prl36

Table des Matières