Adjusting The Input Level - Sony DSR-50 Mode D'emploi

Adjusting Signals
Adjusting the chrominance signal gain level of the composite signal
1
Play back a tape to output the signals from the
VIDEO OUT2 connector.
The vectorscope displays the picture.

Adjusting the Input Level

S VIDEO
IN
DSR-50/50P
VIDEO OUT2
COMPONENT OUTPUT
Adjusting the camera component signal
level
1
Set the INPUT SELECT selector to CAMERA.
2
Stop the unit and set it to the EE mode.
The waveform monitor displays the picture.
68
(GB) Chapter 4 Setting the Time Code and Adjusting the Video Signals
VIDEO/
CAMERA
REF.IN
2
Adjust the chrominance signal gain level in PB
OUTPUT in VIDEO LVL on the VIDEO SET
menu.
For details on "PB OUTPUT", see "VIDEO SET
menu" on page 85 (GB).
or
Reference
signal generator /
or
Camera
Waveform monitor
Composite
Composite
video input
video output
Component
input
3
Adjust the Y, R-Y, and B-Y signal levels in
INPUT in VIDEO LVL on the VIDEO SET menu.
Y LVL: Adjusts the Y signal level.
R-Y LVL: Adjusts the R-Y signal level.
B-Y LVL: Adjusts the B-Y signal level.
For details on "INPUT", see "VIDEO SET menu" on
page 85 (GB).
Vectorscope
Composite
video input