Using The Bp-L40(A)/L60A/L90A Battery Pack - Sony DSR-50 Mode D'emploi

Power Preparations

Using the BP-L40(A)/L60A/L90A Battery Pack

To attach the battery pack in the battery compartment
32
(GB) Chapter 2 Preparations
To charge the battery pack
Before use, charge the battery pack with the BC-L100 or BC-L50 battery
charger.
For more information about how to charge the battery pack, refer to the
instruction manual of the battery charger.
The battery compartment is on the top panel. Attach the battery pack (BP-
L40(A)/L60A/L90A) in the battery compartment as shown below.
1
Lift up the battery cover lock and open the battery cover.
2
Align the three grooves on the bottom of the BP-L40(A)/L60A/L90A
with the three guides on the unit.
Battery connector