Sony DSR-50 Mode D'emploi page 79

Submenu
Icon/Menu
(page)
TC/UB SET
TC TC/UB IN
(page 60 (GB))
TC MAKE
(page 59 (GB))
UB TIME
(page 59 (GB))
JOG TC OUT
(page 59 (GB))
Setting
Selects the time code and user bits to record in the tape.
INTERNAL : Uses the internal time code/user bits.
TC&UB EXT: Uses the external time code/user bits.
TC EXT: Uses the external time code and internal user bits.
UB EXT: Uses the internal time code and external user bits.
Notes
• The time code output from this unit has some restrictions. For details, see pages 63 (GB),
64 (GB).
• Press the SEL/PUSH EXEC dial to execute this submenu. This will also be executed the
moment you switch the position of the DISPLAY (MENU/TC/AUDIO) selector to TC or
AUDIO.
Selects the time code when you start recording.
REGEN : The time code value is set to the continuous time code from the time code
already recorded on the tape. If no time code is recorded on the tape, the time code
starts from 00:00:00:00.
PRESET: The time code value is set to the time code from the value set in PRESET in the
TC PRESET on the TC/UB SET menu.
Selects whether to set the user bits to any particular value or to the real time clock.
OFF : The value set in PRESET in UB PRESET on the TC/UB SET menu is set in the
user bits.
ON: The value set in CLOCK SET on the OTHERS menu (the real time clock) is set in the
user bits.
Note
This item is available only if TC/UB IN is set to INTERNAL or TC EXT.
Controls the time code output from the TC OUT connector when the tape is played at a
speed other than normal.
OFF : Does not output the time code.
ON: Outputs the time code.
Note
The continuous time code is output only when the tape is played at a normal speed. When
the unit is in the search mode, discontinuous time code is output.
Chapter 6 Adjusting and Setting Through Menus
79
(GB)