Connections
Power Preparations
Connections for Recording
To an external camera
This section describes basic connections for recording or playback on the
unit.
The unit can provide an external camera with power.
To provide power to the camera from the unit, see "Notes on Using the DC IN
12V Connector" on the previous page.
Some cameras cannot accept power from the CAMERA connector.
For details, refer to the instruction manual of the camera.
Camera
to the
camera
connector
Camera cable CCZ-As (not supplied)
Note
Use the CCZ-As for the camera cable to meet the FCC Rules and
EN55103-1. (The last numbers indicated by s are different depending on
the cable length.)
DSR-50/50P (right panel)
: Signal flow
Chapter 2 Preparations
35
(GB)