Sony DSR-50 Mode D'emploi page 62

Synchronizing the Time Codes
DSR-50/50P time codes
This unit has a DV IN/OUT connector. The time code
output and recorded on the tape differs as shown below
INPUT SELECT
TC/UB IN
menu
Playback
INTERNAL
UB EXT
EE
TC&UB EXT
TC EXT
62
(GB) Chapter 4 Setting the Time Code and Adjusting the Video Signals
Mode
selector
Playback
Audio dubbing
Playback at various
speeds a)
DUB1 b)
Duplicate
b)
DUP1
DV
Recording
Recording Pause
b)
REC1
VIDEO
Recording
S VIDEO
Recording Pause
CAMERA
REC1 b)
(Except DV)
Duplicate
b)
DUP1
DV
Recording
Recording Pause
b)
REC1
VIDEO
Recording
S VIDEO
Recording Pause
CAMERA
b)
REC1
(Except DV)
Duplicate
DUP1 b)
DV
Recording
Recording Pause
REC1 b)
VIDEO
Recording
S VIDEO
Recording Pause
CAMERA
REC1 b)
(Except DV)
when the INPUT SELECT selector is set to DV and
when it is set to other than DV.
The time code output from the
TC IN
TC OUT (INT) connector and the time code/
(EXT)
user bits recorded on the tape
Time code on the tape
JOG TC OUT: ON – Time code on the tape;
JOG TC OUT: OFF – Mute (No output)
Time code of another device connected to the
DV IN/OUT connector
Time code internally generated
Time code internally generated
Time code of another device connected to the
DV IN/OUT connector
Time code internally generated
Time code connected to TC IN (EXT) is
Yes
through-output.
No output from the TC OUT (INT) connector
(For details, see next page.) : the time code
No
and user bits generated internally are
recorded on the tape.
Time code of another device connected to the
DV IN/OUT connector
Time code: Time code of another device
connected to the DV IN/OUT
connector
User bits: User bits internally generated
Time code connected to TC IN (EXT) is
Yes
through-output.
No No output from the TC OUT (INT) connector
(For details, see next page.) : the time code
and user bits generated internally are
recorded on the tape.
c)
c)
c)
c)
c)
c)
d)