Data Table; Wiring Diagram Ck 150-1 Trend; Wiring Diagram Ck 200-2 Trend - Stiebel Eltron CK 150-1 Trend Manuel D'utilisation Et Installation

INSTALLATION
NOTE:
7
The dust filter is 10 /
8
To enable removal of the dust filter as described (See
6, "Cleaning, care and maintenance", pg. 4), main-
tain a sufficiently large clearance at the side.
If you have installed the heater in a recess, detach the
heater from the wall mounting bracket before remov-
ing the dust filter.
WARNING: Fire
Combustible materials such as furniture, papers,
clothes and curtains must be kept at least 3 feet (0.9 m)
from the heater.
Never place any flammable, combustible or insulating
objects or materials, such as laundry, blankets, maga-
zines, containers with floor polish or gasoline, spray
cans or similar on the heater or in direct proximity to
it.

14.3 Data table

Part number
Electrical data
Phase/Frequency
Heating Capacity
Rated voltage
Amperage
Required wire size (copper)
Dimensions
Height
Width
Depth
Weights
Weight
Miscellaneous
Frost protection setting
Color
Setting range
Operating noise
www.stiebel-eltron-usa.com
˝ (27.5 cm) wide.
CK 150-1 Trend CK 200-2 Trend
236304 236305
1 - 60 Hz
1500 W 2000 W 1800 W
120 V 240 V 208 V
12.5 A 8.3 A 8.7 A
14 AWG 14 AWG
15¾˝ (40.0 cm)
7
10 / ˝ (27.5 cm)
8
1
5 / ˝ (13.1 cm)
8
5.5 lbs (2.5 kg)
45°F (7°C)
Traffic white, RAL 9016
45–95 °F (7–35 °C)
49 dB(A)

14.4 Wiring diagram CK 150-1 Trend

N1
A1
S1
H1
X1
N L
A1 Heating element assembly
F1 High temperature limiter
H1 Fusible link
H2 Fusible link
M1 Fan motor
N1 Thermostat
S1 On/off switch
X1 Wiring block

14.5 Wiring diagram CK 200-2 Trend

N1
A1
S1
H1
X1
L L
A1 Heating element assembly
F1 High temperature limiter
H1 Fusible link
H2 Fusible link
M1 Fan motor
N1 Thermostat
S1 On/off switch
X1 Wiring block
H2
M1
M
~1
F1
H2
M1
M
~1
F1
CK 150-1 / 200-2 Trend | 9