M-Audio M-TRACK PLUS Guide D'utilisation page 3

User Guide (English)
Introduction
Box Contents
M-Track Plus (MKII)
USB Cable
Software Download Cards
Support
For the latest information about this product (system requirements, compatibility information, etc.)
and product registration, visit m-audio.com.
For additional product support, visit m-audio.com/support.
Quick Start / Connection Diagram
Windows users: Before connecting M-Track Plus to your computer, install the drivers:
1. Go to m-audio.com/drivers and download the latest M-Track Plus driver for your operating
system.
2. Open the file you downloaded and double-click the driver installer file.
3. Follow the on-screen instructions to install the drivers. (You may be asked to connect M-Track
Plus to your computer during the installation process.)
Computer
Vocal
Microphone
Note:
•
Remember to select M-Track Plus as your interface in the Preferences, Options, Device
Setup, etc. in your digital audio workstation (DAW).
•
When recording a microphone or a guitar or bass with an active pickup, set the Instrument
Selector to Line. If your instrument uses a passive pickup, set the selector to Inst.
•
Use the +48V Switch only if a microphone requires phantom power. Dynamic microphones and
ribbon microphones do not require phantom power, but most condenser microphones do.
Consult your microphone's documentation to find out whether it needs phantom power.
User Guide
Safety & Warranty Manual
Powered
Monitors
Headphones
Guitar
Items not listed under the
Box Contents are sold
separately.
3