Appendix (English)
Technical Specifications
All specifications are measured at 20 kHz bandwidth. Specifications are subject to change without notice.
Mic Inputs 1–2
(balanced XLR)
Frequency Response
Dynamic Range
Signal-to-Noise Ratio
THD+N
Preamp EIN
Sensitivity
Gain Range
Line Inputs 1–2
(balanced 1/4" [6.35 mm] TRS)
Frequency Response
THD+N
Sensitivity
Gain Range
Inst Inputs 1–2
(unbalanced 1/4" [6.35 mm] TS)
Frequency Response
THD+N
Sensitivity
Input Impedance
Gain Range
Main Outputs, L and R
Frequency Response
Dynamic Range / Signal-to-Noise Ratio
THD+N
Max Output Level
General
Power
Dimensions
(width x depth x height)
Weight
Trademarks and Licenses
M-Audio is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries.
Kensington and the K & Lock logo are registered trademarks of ACCO Brands. All other product or
company names are trademarks or registered trademarks of their respective owners.
18
20 Hz – 20 kHz (+0.1 dB)
104 dB (A-weighted)
104 dB (1 kHz, +1.4 dBu, A-weighted)
0.003% (1 kHz, +2 dBu input, -0.8 dBFS)
-133 dBu (max gain, 40 Ω source, A-weighted)
-126 dBu (max gain, 150 Ω source, unweighted)
-53 dBu
55 dB
20 Hz – 20 kHz (+0.1 dB)
0.004% (1 kHz, -1 dBFS)
-43 dBu
55 dB
20 Hz – 20 kHz (+0.1 dB)
0.022% (1 kHz, -1 dBFS)
-47 dBu
1 MΩ
55 dB
(impedance-balanced 1/4" [6.35 mm] TRS)
20 Hz – 20 kHz (+0.3 dB)
102 dB (A-weighted)
0.008% (1 kHz, -1 dBFS)
+2.86 dBu
USB-bus-powered
9.4" x 4.8" x 2.1" / 23.9 cm x 12.2 cm x 5.3 cm
2.4 lbs. / 1.1 kg